London · Gas Safe registered

Gas interlock system installation in Bexley, Sidcup & Dartford

We supply, install, wire and certify commercial gas interlock systems across Bexley, Sidcup & Dartford — Bexley, Bexleyheath, Sidcup, Dartford and every postcode below. Panels, solenoid valves and air pressure switches are carried in stock, so most kitchens are back cooking the same day.

  • Covering 18 postcode districts in Bexley, Sidcup & Dartford
  • Interlock panel, valve and sensor stock on the van
  • BS 6173 / IGEM/UP/19 certificate issued on completion

System architecture

Fan SensorsPressure / airflow / currentEmergency StopLatching e-stop buttonsGas DetectionMethane · CO · CO₂Interlock ControllerGas safety control panelProving PanelPressure proving testSolenoid ValveNormally closed shut-offAppliancesCatering / boilersproving result
Interlock Controller → Fan Sensors → Proving Panel → Solenoid Valve. Losing any proof of ventilation de-energises the valve and isolates the gas supply.

Interlock installation in Bexley, Sidcup & Dartford

Retail-park restaurants, care homes and distribution-centre canteens along the A2 corridor. Whatever the site, the installation follows the same principle: the gas supply to your cooking appliances is proved and released only when the extract and make-up air systems are running correctly.

Our engineers survey the kitchen, size the solenoid valve to the existing gas pipework (commonly 28mm, 35mm or a flanged valve on larger ranges), fit the interlock control panel where staff can reach the reset and emergency stop, and wire the airflow proving devices back to the panel. The system is then tested, commissioned and certificated.

  • Site survey and gas supply assessment
  • Interlock control panel supplied and fitted
  • Normally closed gas solenoid safety shut-off valve
  • Air pressure / airflow proving switches and current sensors
  • Emergency stop buttons at kitchen exits
  • Commissioning, gas soundness test and certification

Postcodes we cover in Bexley, Sidcup & Dartford

Every postcode district listed here is covered for installation, servicing and emergency repair: DA1, DA2, DA3, DA4, DA5, DA6, DA7, DA8, DA9, DA10, DA11, DA12, DA13, DA14, DA15, DA16, DA17, DA18.

Postcode districtsTowns & areas
DA1, DA2, DA3, DA4, DA5, DA6, DA7, DA8, DA9, DA10, DA11, DA12, DA13, DA14, DA15, DA16, DA17, DA18Bexley, Bexleyheath, Sidcup, Dartford, Erith, Welling, Greenhithe, Gravesend

Response times and emergency call-out

  • Planned installations booked to suit trading hours, including nights and weekends
  • Emergency attendance for kitchens with no gas — same day wherever possible
  • Replacement panels, valves, pressure switches and thermocouples carried in stock
  • Out-of-hours access, permits and RAMS handled for managed sites

Compliance and certification

Installations are carried out to BS 6173 (installation of gas appliances in catering establishments) and IGEM/UP/19 (design and application of interlock devices), by engineers holding the relevant commercial catering and Gas Safe qualifications.

You receive a commissioning record and interlock test certificate for your gas safety file, which is what an environmental health officer, insurer or landlord will ask to see.

Frequently asked questions

Do you cover my postcode in Bexley, Sidcup & Dartford?

Yes — we cover DA1, DA2, DA3, DA4, DA5, DA6, DA7, DA8, DA9, DA10, DA11, DA12, DA13, DA14, DA15, DA16, DA17, DA18 and the surrounding districts. If your postcode is on the edge of the area, call us and we will confirm the same day.

How long does a gas interlock installation take in Bexley, Sidcup & Dartford?

A typical single-kitchen installation is completed in one working day. Larger kitchens, multiple valves or new ventilation controls can take two days, and we can work overnight to avoid closing the kitchen.

Is a gas interlock a legal requirement?

Where a commercial kitchen has mechanical ventilation and gas appliances, an interlock is required in practice by BS 6173 and expected by Gas Safe engineers, environmental health and insurers. Without one, a gas engineer can class the installation as at risk.

Can you install on an existing extraction system?

Yes. In most cases the existing extract and make-up air fans are retained and we add proving devices, the interlock panel and the gas solenoid valve. If airflow is inadequate we will tell you what needs putting right.

Related guides

Parts in stock — ready to fit

Held in UK stock and carried on our vans, so most jobs are fixed in one visit.

  • Replacement gas interlock systems

    Merlin, Medem, Intelligas, S&S Northern

    In stock today

  • Air pressure switches

    Fan & gas proving pressure switches

    In stock today

  • Gas solenoid valves

    Normally closed safety shut-off valves

    In stock today

  • Quick release gas catering hoses

    Commercial ranges, bays & mobile catering

    In stock today

  • Super universal thermocouples

    Fits most commercial gas appliances

    In stock today

  • Need a part fitted?

    Same-day engineer dispatch with these parts on the van.

  • Gas Safe Registered

    Commercial catering & plant

  • 24/7 UK Response

    Same-day emergency dispatch

  • Vetted Engineers

    DBS checked for schools & care

  • Transparent Pricing

    Fixed callout, quoted parts

Areas we cover

Gas interlock installation, servicing and emergency repair across 34 areas of London, Surrey and the M25 towns — 372 postcode districts in total.

Call UsWhatsApp