Regulations

Commercial Kitchen Gas Regulations (UK)

Commercial kitchen gas safety in the UK rests on one law and a small set of standards. The law says the gas installation must be safe and worked on only by competent, Gas Safe registered engineers; the standards say how.

  • Gas Safety (Installation and Use) Regulations 1998
  • BS 6173 for catering installations and ventilation interlocks
  • Annual CP42 inspection as recognised good practice

Quick answer

In the UK, the Gas Safety (Installation and Use) Regulations 1998 require commercial kitchen gas installations to be safe and worked on only by Gas Safe registered engineers. BS 6173 and IGEM/UP/19 require the gas to be interlocked with mechanical ventilation, and an annual CP42 inspection is the recognised record of compliance.

Law
Gas Safety (Installation and Use) Regulations 1998
Standards
BS 6173, IGEM/UP/19, IGEM/UP/11
Inspection
CP42 every 12 months
Duty-holder
Operator or landlord

The law: Gas Safety (Installation and Use) Regulations 1998

These regulations apply to gas fittings in most workplaces. Anyone working on gas must be competent and Gas Safe registered. Employers and people in control of premises must make sure gas appliances and pipework are maintained in a safe condition. The Health and Safety at Work etc. Act 1974 sits above this and puts a general duty on employers to protect staff and the public.

The key standards

StandardWhat it covers
BS 6173Installation and maintenance of gas-fired catering appliances, including ventilation interlocks
IGEM/UP/19Design and application of interlock devices and associated systems in catering establishments
IGEM/UP/1 and UP/1AStrength and tightness testing of commercial gas pipework
IGEM/UP/2Installation of gas pipework in commercial and industrial buildings
DW/172Specification for kitchen ventilation systems

Ventilation and the gas interlock

Commercial kitchens with mechanical extraction must have the gas supply interlocked with the ventilation, so gas cannot flow unless the fans are proven to be running. If a fan fails, a normally closed gas solenoid valve shuts the gas automatically. Emergency stop buttons must be fitted so staff can shut off the gas quickly.

Inspections and certificates

There is no single certificate the law names for commercial kitchens, but an annual inspection by a Gas Safe registered commercial catering engineer, recorded on a CP42, is the recognised way to show the installation has been maintained. Landlords, insurers and environmental health officers routinely ask to see it.

Who is responsible?

  • The business operator for the appliances and day-to-day safety
  • The landlord where they own the gas installation or ventilation
  • Gas Safe registered engineers for the work they carry out
  • Kitchen designers and installers for new installations meeting BS 6173

Commercial kitchen gas safety checklist

  • Current CP42 gas safety record within the last 12 months
  • Working ventilation interlock with labelled emergency stops
  • Appliances fixed with restraints and correct flexible hoses
  • Manual isolation valve that staff can find and reach
  • Extract canopy and ductwork cleaned and maintained
  • Gas detection or CO₂ monitoring where the risk assessment calls for it

Frequently asked questions

Is a gas interlock system a legal requirement?

The Gas Safety (Installation and Use) Regulations require gas installations to be safe; BS 6173 is the recognised standard that sets out how, and it requires a ventilation interlock where mechanical extraction is installed. Insurers and environmental health officers enforce it in practice.

Do you need a gas safety certificate for commercial properties?

Commercial catering premises are expected to have their gas installation inspected and certified by a Gas Safe engineer, normally every 12 months. The CP42 record is what insurers, landlords and environmental health officers ask to see.

What are the gas regulations for commercial kitchens in the UK?

The Gas Safety (Installation and Use) Regulations 1998 require the installation to be safe and maintained by Gas Safe engineers. BS 6173 and IGEM/UP/19 set out how, including the ventilation interlock.

Is a CP42 a legal requirement?

The law requires the installation to be maintained safely; a CP42 is the recognised record of that. In practice, insurers, landlords and environmental health officers expect one every 12 months.

Do commercial kitchens need a gas interlock?

Yes, where mechanical extraction is installed. BS 6173 requires the gas supply to be interlocked with the ventilation.

Related guides

Parts in stock — ready to fit

Held in UK stock and carried on our vans, so most jobs are fixed in one visit.

  • Replacement gas interlock systems

    Complete panels & kits ready to fit

    In stock today

  • Air pressure switches

    Fan & gas proving pressure switches

    In stock today

  • Gas solenoid valves

    Normally closed safety shut-off valves

    In stock today

  • Quick release gas catering hoses

    Commercial ranges, bays & mobile catering

    In stock today

  • Super universal thermocouples

    Fits most commercial gas appliances

    In stock today

  • Need a part fitted?

    Same-day engineer dispatch with these parts on the van.

  • Gas Safe Registered

    Commercial catering & plant

  • 24/7 UK Response

    Same-day emergency dispatch

  • Vetted Engineers

    DBS checked for schools & care

  • Transparent Pricing

    Fixed callout, quoted parts

Call Us