Answer hub · Checklist

Commercial kitchen gas safety checklist

Use this checklist before an inspection, a new lease or an insurance renewal. Anything you cannot tick is worth raising with a Gas Safe engineer.

  • Ten-point checklist
  • What to do if something fails
  • Links to the right service

Quick answer

A compliant commercial kitchen normally has a working gas interlock linked to the extraction, a normally-closed gas solenoid valve, reachable emergency stops, adequate ventilation, gas proving where required, gas or CO₂ detection where appropriate, and a current CP42 gas safety certificate renewed every 12 months.

Certificate
CP42, every 12 months
Standards
BS 6173, IGEM/UP/19, IGEM/UP/11
How to book
Call 020 8935 5572 or book online, 24/7

The checklist

  • Gas interlock fitted and linked to extract and supply fans
  • Gas shuts off when the extraction is switched off (tested)
  • Normally-closed gas solenoid valve on the kitchen supply
  • Emergency stop buttons near exits and clearly labelled
  • Manual emergency isolation valve accessible
  • Gas proving fitted where required (schools, colleges, larger kitchens)
  • Gas, CO or CO₂ detection where appliances or cylinders need it
  • Extraction canopy, filters and ductwork clean
  • Appliances have working flame failure devices
  • Current CP42 certificate with no outstanding defects

If something fails

Book a Gas Safe registered commercial catering engineer. We carry interlock panels, gas solenoid valves and air pressure switches in stock, so most defects found on the checklist can be put right on the first visit.

Frequently asked questions

How often should commercial kitchen gas safety be checked?

A full CP42 inspection is normally carried out every 12 months, with the gas interlock tested at the same visit. Staff should check fans, emergency stops and appliance taps daily.

Do I need gas detection in a commercial kitchen?

It depends on the appliances, ventilation and building. CO₂ monitoring is often recommended where ventilation is poor, and gas detection is common in basements and plant rooms.

Related guides

Parts in stock — ready to fit

Held in UK stock and carried on our vans, so most jobs are fixed in one visit.

  • Replacement gas interlock systems

    Complete panels & kits ready to fit

    In stock today

  • Air pressure switches

    Fan & gas proving pressure switches

    In stock today

  • Gas solenoid valves

    Normally closed safety shut-off valves

    In stock today

  • Quick release gas catering hoses

    Commercial ranges, bays & mobile catering

    In stock today

  • Super universal thermocouples

    Fits most commercial gas appliances

    In stock today

  • Need a part fitted?

    Same-day engineer dispatch with these parts on the van.

  • Gas Safe Registered

    Commercial catering & plant

  • 24/7 UK Response

    Same-day emergency dispatch

  • Vetted Engineers

    DBS checked for schools & care

  • Transparent Pricing

    Fixed callout, quoted parts

Call Us